Soft Wash Where the Surface Needs It
Vinyl and wood get low pressure with a cleaning solution doing the work. Raw force damages the surface and drives water in behind panels.
Siding, driveways, decks, and patios cleaned without stripping the surface underneath. DNVC Fenix Painting LLC removes dirt, mildew, and algae from New Jersey properties, on its own or before painting.
Anyone can rent a pressure washer. The damage shows up later. Too much pressure carves lines into wood, forces water behind siding, and strips the surface of a driveway. The skill is knowing how much pressure each material takes and stopping there.
DNVC Fenix Painting LLC cleans exteriors in New Jersey. Siding, brick, concrete, decks, patios, fences, and walkways. Dirt, mildew, algae, pollen, and salt residue come off. Available as a standalone cleaning or as the first step before an exterior paint job.
Vinyl and wood get low pressure with a cleaning solution doing the work. Raw force damages the surface and drives water in behind panels.
Mildew and algae are living growth. Water alone rinses them off temporarily. The right solution kills them so they do not regrow in a month.
Beds wetted down and covered before starting. Outlets shielded, furniture cleared. Everything rinsed clean at the end before we load the truck.
Concrete takes what wood cannot. A surface cleaner keeps driveway passes even. Mortar joints get a pressure adjusted to the joint, not the face.
Standalone cleaning for siding, decks, and driveways. Also runs as the first step of any exterior paint job so the new coat actually bonds.
Every exterior surface takes a different amount of pressure. These are the areas cleaned on a typical New Jersey power washing job.
House washing for vinyl, aluminum, wood, and cedar shake siding. Low pressure and cleaning solution do the work instead of raw force, so water never gets driven behind the panels. Green algae on the shaded north side comes off along with pollen and surface chalking.
Concrete and asphalt driveway cleaning, plus sidewalks, walkways, front steps, and porch landings. A surface cleaner attachment keeps the pass even instead of leaving wand stripes across the slab. Oil spots, tire marks, black streaks, and winter salt residue treated individually before the final rinse.
Wood decks, composite decking, pavers, and concrete patios cleaned at a pressure the material can take. Wood gets low pressure because high pressure raises the grain and splinters the board. Often the step before staining or sealing, and the difference between both of them lasting.
Vinyl, wood, and chain link fences plus block retaining walls cleaned of mildew, moss, and ground splash. Fence lines collect organic growth faster than any other surface because they sit in shade and grass. Cleaned before staining or sealing, and left clean on their own.
Brick, stone, stucco, and block surfaces cleaned with pressure adjusted to the mortar, not just the face. Old mortar joints blow out under a careless wand at full pressure. Efflorescence, moss, and years of street grime removed from steps, columns, walls, chimneys, and entry facades.
Storefronts, sidewalks, entryways, dumpster pads, and building facades cleaned for local businesses. Gum, grease, and foot traffic buildup at the entrance decide what a customer thinks before walking in. Scheduled for early morning or on closed days so nothing ever blocks your doorway or entrance.
Vinyl and wood take low pressure with a cleaning solution. Concrete takes what wood cannot. The setting matches the surface.
Mildew and algae are living growth. Water alone rinses them off temporarily. The solution kills them so they do not regrow fast.
Most black streaks and green growth come off completely. Deep oil, rust, and old dyes may not. You hear that before we start.
Five steps from the first walkthrough to the final review. You know what happens, when it happens, and what has to be ready.
We walk the property, note the surfaces and their condition, and price the job before scheduling any work.
Plants covered or wet down, outlets and fixtures shielded, and furniture moved clear of the working area first.
Cleaning solution goes on the surface and sits long enough to break down the mildew, algae, and grime.
Pressure set per material, worked in even passes so no lines, stripes, or streaks are left behind anywhere.
Everything rinsed down, plants rinsed clean, and we walk the property with you before we load the truck.
A look at our recent work. Click any image to open the full view.
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
⤢
Not at the right pressure. Vinyl and wood get cleaned at low pressure with a solution doing the work. The damage people worry about comes from running everything at full blast, which is exactly what we don't do.
Depends on exposure. A shaded north wall under trees grows algae far faster than an open sunny side. Coastal towns deal with salt residue on top of that. We'll tell you what your property actually needs.
Solution, on most jobs. Water alone pushes dirt around and does nothing to mildew or algae, which are living growth. The solution kills it so it doesn't come back in a month.
We wet down and cover the beds before starting, then rinse everything again at the end. Point out anything newly planted or fragile at the walkthrough and we'll work around it.
Not usually. We need water access and a clear path around the property. If you'd rather be there for the walkthrough at the end, tell us and we'll time it.
Most of them, yes. Black streaks on siding and roofs and green growth on concrete are organic and respond to the right solution. Rust and deep oil stains are a different fight and we'll be straight with you about it.
Power washing available in the towns below. Based in Linden, working across four New Jersey counties in Union, Middlesex, Monmouth, and Ocean.
City not on the list? We travel across New Jersey for this work. Ask about your town.
Tell us what needs cleaning. Siding, driveway, deck, or all three. The estimate is free and there is no obligation.
Call Us Direct (917) 714-0823Four other services available under the same contract, delivered by the same crew, with the same free estimate process.
01
Siding, trim, shutters, and porches painted after a full wash and prep. Curb appeal that lasts through New Jersey winters.
Read More
02
Painting for houses, apartments, condos, and townhomes. Single rooms or a full property, inside and outside, all on one schedule.
Read More
03
Offices, retail stores, restaurants, and warehouses painted around your hours, with coatings built for constant traffic and repeated cleaning cycles.
Read More
04
Walls, ceilings, trim, and doors painted with full patching and priming. Clean lines and even coverage in every single room.
Read More